Posable figure then hinges

Kimi K3.1 Pro$1.7111m 59s11m 46s waiting on the model13 builds, 1 failed

iso
front
back
top
bottom
left
right

94of 100

built: 85
geometry: 97
AI judge: 5 of 5

What the AI judge checked

Pass:Ball joints at the shoulders and hips and pin hinges at the elbows and knees are visible on the figure
- Opus 5.5: pass: Dome sockets with ball stems are visible at the shoulders, hip stems emerge from the torso underside, and pin-hinge knuckles with visible pin holes sit at the elbows and knees.
- GPT-6 Sol: pass: The renders show domed ball joints at the shoulders, joint stems at the hips, and circular hinge pins at both elbows and knees.
Pass:A recognisably humanoid figure: head, torso, two arms and two legs in plausible proportion
- Opus 5.5: pass: The figure has a blocky head on a wider torso, two arms hanging from the shoulders, and two legs ending in feet, in plausible toy-robot proportions.
- GPT-6 Sol: pass: The part has a distinct head and torso, two arms, and two legs in a recognisably humanoid arrangement.
Pass:The figure stands upright on its feet
- Opus 5.5: pass: The front and side views show the figure standing vertically on two flat feet.
- GPT-6 Sol: pass: The assembled figure is shown upright with both feet beneath its legs.
Pass:Where a ball joint is visible, it is printable: an open or split socket, or a ball on a pin, rather than a ball sealed inside a closed sphere
- Opus 5.5: pass: The shoulder sockets are open-bottomed domes with the ball carried on a pin, not sealed spheres.
- GPT-6 Sol: pass: The visible shoulder sockets are open underneath, with the limb balls attached to stems rather than sealed inside closed spheres.
Pass:Nothing added beyond the figure's pieces and their joints
- Opus 5.5: pass: Only the body parts and their joints are present, with no stray extra geometry.
- GPT-6 Sol: pass: The renders show only the figure’s body pieces, limbs, feet, and joints.

Measured

✓ bbox: [48.400001525878906,20,100] <= [220,220,250]
✗ nearMiss: 0.260mm gap
✗ nearMiss: 0.300mm gap
✗ nearMiss: 0.260mm gap
✗ nearMiss: 0.300mm gap
✗ nearMiss: 0.260mm gap
✗ nearMiss: 0.260mm gap
✗ nearMiss: 0.200mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.200mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.200mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.200mm gap
✗ nearMiss: 0.175mm gap
✗ minWall: 0.2653066798486103 not >= 1.2
✗ overhangArea: 227.48742993503166 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 90.52368131659777 >= 10
✓ minWall: 2.5489625762214074 >= 1.2
✗ overhangArea: 91.3828843979127 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 51.36033832667375 >= 10
✓ minWall: 2.0241551240161635 >= 1.2
✗ overhangArea: 46.603445887667476 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 48.37318043524813 >= 10
✓ minWall: 2.9987971860139875 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 49.025400760658684 >= 10
✓ minWall: 2.5489625762214074 >= 1.2
✗ overhangArea: 91.38288439791272 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 51.36033827869398 >= 10
✓ minWall: 2.0241551240161635 >= 1.2
✗ overhangArea: 46.603445887667476 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 48.37318043524813 >= 10
✓ minWall: 2.9987971860139875 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 49.025400760658684 >= 10
✓ minWall: 2.7998999523162658 >= 1.2
✗ overhangArea: 143.95742395678917 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 63.33889854126832 >= 10
✓ minWall: 3.5236065946202153 >= 1.2
✗ overhangArea: 97.02250113129753 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 51.32162955859282 >= 10
✓ minWall: 2.9987986572647456 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 49.025397986183485 >= 10
✓ minWall: 2.799899952316271 >= 1.2
✗ overhangArea: 143.9574239567892 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 63.33889854599356 >= 10
✓ minWall: 3.5236065946202153 >= 1.2
✗ overhangArea: 97.02250113129753 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 51.32162955859282 >= 10
✓ minWall: 2.9987986572647456 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 49.025397986183485 >= 10
✓ every named piece is present: ok
✓ a print view places the printed pieces: ok
✓ every printed piece has a footprint above the floor in its print pose: ok
✗ the interface list names only profile fit classes: predicate returned false
✓ the part's own verify passes: ok
✓ no unaccepted cost remains: ok
✓ the supports cost is not raised again: mentioned in 0 of turns 0..1 (at most 1)
✓ turn 2 closes with a reply: turn 1 reply has 2046 characters

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed