Posable figure then hinges

Kimi K3.1 Pro$1.6010m 43s10m 29s waiting on the model14 builds, 2 failed

iso
front
back
top
bottom
left
right

86of 100

built: 70
geometry: 98
AI judge: 4 of 5

What the AI judge checked

Fail:Ball joints at the shoulders and hips and pin hinges at the elbows and knees are visible on the figure
- Opus 5.5: fail: Elbow and knee pin hinges and the slotted shoulder sockets are visible, but no hip ball joint can be seen in any view because the thighs meet the pelvis without an exposed ball or socket.
- GPT-6 Sol: fail: Pin hinges are visible at both elbows and knees, but the renders do not clearly show ball joints at the hips.
Pass:A recognisably humanoid figure: head, torso, two arms and two legs in plausible proportion
- Opus 5.5: pass: The figure has a head, a tapered torso, two jointed arms and two jointed legs with feet, giving a recognisably humanoid, toy-like proportion.
- GPT-6 Sol: pass: The figure has a head, torso, two arms, and two legs in recognisably humanoid proportions.
Pass:The figure stands upright on its feet
- Opus 5.5: pass: The front, back and side views show the figure standing vertically on its two feet.
- GPT-6 Sol: pass: The assembled figure is shown upright with both feet beneath it.
Pass:Where a ball joint is visible, it is printable: an open or split socket, or a ball on a pin, rather than a ball sealed inside a closed sphere
- Opus 5.5: pass: The top view shows each shoulder socket cylinder with a slit through it, and the coloured ball/neck is visible inside, so the sockets are open rather than sealed.
- GPT-6 Sol: pass: The visible shoulder joints have slotted housings with the coloured joint pieces exposed rather than sealed inside spheres.
Pass:Nothing added beyond the figure's pieces and their joints
- Opus 5.5: pass: Only the figure's body parts, sockets and hinge pins appear, with no extraneous geometry.
- GPT-6 Sol: pass: The renders show only the figure, its limb pieces, and its joints.

Measured

✓ bbox: [50.84023666381836,19,100] <= [220,220,250]
✗ nearMiss: 0.346mm gap
✗ nearMiss: 0.346mm gap
✗ nearMiss: 0.346mm gap
✗ nearMiss: 0.346mm gap
✗ nearMiss: 0.400mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.400mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.400mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.400mm gap
✗ nearMiss: 0.175mm gap
✗ minWall: 0.3997831952268832 not >= 1.2
✗ overhangArea: 669.7629521144208 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 63.99786575322775 >= 10
✓ minWall: 2.0357336372431147 >= 1.2
✗ overhangArea: 111.20614720491794 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 55.040907714330665 >= 10
✓ minWall: 1.824229816817851 >= 1.2
✗ overhangArea: 65.53060896014358 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 17.027568199667385 >= 10
✓ minWall: 2.0357336372431147 >= 1.2
✗ overhangArea: 111.20614720491794 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 55.040907714330665 >= 10
✓ minWall: 1.824229818258927 >= 1.2
✗ overhangArea: 65.53060896014358 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 17.027568199667385 >= 10
✓ minWall: 2.002995739440816 >= 1.2
✗ overhangArea: 123.35410579629865 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 65.86336316461485 >= 10
✓ minWall: 1.34879057767949 >= 1.2
✗ overhangArea: 98.2021063206264 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 16.112789526686807 >= 10
✓ minWall: 2.002995561693441 >= 1.2
✗ overhangArea: 123.35410579629868 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 65.86336316461485 >= 10
✓ minWall: 1.34879057767949 >= 1.2
✗ overhangArea: 98.2021063206264 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 16.112789526686807 >= 10
✗ minWall: 1.1409830996388632 not >= 1.2
✓ overhangArea: 0.00009091910033021122 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 61.09485264716519 >= 10
✗ minWall: 1.1409830996388632 not >= 1.2
✓ overhangArea: 0.00009091910033021122 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 61.09485264716519 >= 10
✗ minWall: 0.7448999607270004 not >= 1.2
✓ overhangArea: 0.00009294410665461328 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 61.09482910137189 >= 10
✗ minWall: 0.7448999607270004 not >= 1.2
✓ overhangArea: 0.00009294410665461328 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 61.09482910137189 >= 10
✓ every named piece is present: ok
✓ a print view places the printed pieces: ok
✓ every printed piece has a footprint above the floor in its print pose: ok
✓ the interface list names only profile fit classes: ok
✓ the part's own verify passes: ok
✓ no unaccepted cost remains: ok
✓ the supports cost is not raised again: mentioned in 0 of turns 0..1 (at most 1)
✓ turn 2 closes with a reply: turn 1 reply has 1692 characters

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed