Posable figure then hinges

Sonnet 5.5, effort high$1.178m 44s8m 39s waiting on the model4 builds

iso
front
back
top
bottom
left
right

100of 100

built: 100
geometry: 100
AI judge: 5 of 5

What the AI judge checked

Pass:Ball joints at the shoulders and hips and pin hinges at the elbows and knees are visible on the figure
- Opus 5.5: pass: Shoulder and hip ball necks with split slots are visible at the top of each limb, and clevis hinges with purple pins are visible at the elbows and knees.
- GPT-6 Sol: pass: The renders show blue shoulder and hip joint pegs and distinct pin-hinge connections at both elbows and knees.
Pass:A recognisably humanoid figure: head, torso, two arms and two legs in plausible proportion
- Opus 5.5: pass: The figure has a head, a shouldered torso, two two-segment arms and two two-segment legs with feet, all in plausible blocky proportions.
- GPT-6 Sol: pass: The part has a head, torso, two arms, and two legs in recognisably humanoid proportions.
Pass:The figure stands upright on its feet
- Opus 5.5: pass: The front and side views show the figure standing vertically on the feet of its shins.
- GPT-6 Sol: pass: The assembled figure is shown upright with both feet at its base.
Pass:Where a ball joint is visible, it is printable: an open or split socket, or a ball on a pin, rather than a ball sealed inside a closed sphere
- Opus 5.5: pass: The limb tops show slotted, split sockets around ball necks rather than sealed spheres.
- GPT-6 Sol: pass: The visible shoulder and hip joint pegs enter slotted limb ends rather than sealed spherical housings.
Pass:Nothing added beyond the figure's pieces and their joints
- Opus 5.5: pass: Only the figure pieces, their joints and pins are visible, with no extraneous geometry.
- GPT-6 Sol: pass: The renders show only the figure and its joints, with no unrelated objects.

Measured

✓ bbox: [55,19.5,100] <= [220,220,250]
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.300mm gap
✗ nearMiss: 0.025mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.300mm gap
✗ nearMiss: 0.025mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.300mm gap
✗ nearMiss: 0.025mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.300mm gap
✗ nearMiss: 0.025mm gap
✗ nearMiss: 0.175mm gap
✓ minWall: 1.6093090900153129 >= 1.2
✗ overhangArea: 99.98728843725188 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 74.68437705585664 >= 10
✗ minWall: 1.1225060704742476 not >= 1.2
✗ overhangArea: 146.14447096614572 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 99.2649426107165 >= 10
✓ minWall: 3.423807216319517 >= 1.2
✗ overhangArea: 95.0341075679778 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 64.93968505239519 >= 10
✗ minWall: 1.1225060704742476 not >= 1.2
✗ overhangArea: 146.14447096614572 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 99.2649426107165 >= 10
✓ minWall: 3.423807216319517 >= 1.2
✗ overhangArea: 95.0341075679778 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 64.93968505239519 >= 10
✗ minWall: 1.1225060809055096 not >= 1.2
✗ overhangArea: 146.14444232782992 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 99.26494008588706 >= 10
✓ minWall: 3.4238072346677977 >= 1.2
✗ overhangArea: 94.58846412077321 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 69.1744554979605 >= 10
✗ minWall: 1.1225060809055092 not >= 1.2
✗ overhangArea: 146.14444291881517 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 99.26494008588706 >= 10
✓ minWall: 3.4238072346677977 >= 1.2
✗ overhangArea: 94.58846412077321 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 69.1744554979605 >= 10
✓ minWall: 2.6691663732726107 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 59.973506132761635 >= 10
✓ minWall: 2.6691663732726107 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 59.973506132761635 >= 10
✓ minWall: 2.6691663732726143 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 59.973506132761635 >= 10
✓ minWall: 2.6691663732726143 >= 1.2
✓ overhangArea: 0 <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 59.973506132761635 >= 10
✓ every named piece is present: ok
✓ a print view places the printed pieces: ok
✓ every printed piece has a footprint above the floor in its print pose: ok
✓ the interface list names only profile fit classes: ok
✓ the part's own verify passes: ok
✓ no unaccepted cost remains: ok
✓ the supports cost is not raised again: mentioned in 0 of turns 0..1 (at most 1)
✓ turn 2 closes with a reply: turn 1 reply has 2181 characters

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed