Posable figure then hinges

Sonnet 5.5, effort high$1.5410m 48s10m 40s waiting on the model9 builds

iso
front
back
top
bottom
left
right

100of 100

built: 100
geometry: 100
AI judge: 5 of 5

What the AI judge checked

Pass:Ball joints at the shoulders and hips and pin hinges at the elbows and knees are visible on the figure
- Opus 5.5: pass: Shoulder and hip ball sockets with slotted necks are visible, and side views show split pin pegs at elbows and knees connecting distinct colored halves.
- GPT-6 Sol: pass: The renders show slotted ball joints at both shoulders and hips, and circular pin hinges at both elbows and knees.
Pass:A recognisably humanoid figure: head, torso, two arms and two legs in plausible proportion
- Opus 5.5: pass: The figure has a spherical head, box torso, two segmented arms and two segmented legs with feet in plausible toy proportions.
- GPT-6 Sol: pass: The part has a distinct head, torso, two arms, and two legs in recognisably humanoid proportions.
Pass:The figure stands upright on its feet
- Opus 5.5: pass: Front and side views show the figure standing vertically on two flat feet.
- GPT-6 Sol: pass: The assembled figure is vertical with both feet beneath it.
Pass:Where a ball joint is visible, it is printable: an open or split socket, or a ball on a pin, rather than a ball sealed inside a closed sphere
- Opus 5.5: pass: The top view shows slotted ball pegs from the torso entering limb sockets with visible slits, indicating split, printable fits.
- GPT-6 Sol: pass: Visible shoulder and hip joints have slotted sockets with exposed ball stems rather than sealed spheres.
Pass:Nothing added beyond the figure's pieces and their joints
- Opus 5.5: pass: Only the figure's body parts and joints appear; there are no stray extra objects in the renders.
- GPT-6 Sol: pass: The renders show only the figure, its limb pieces, and their joints.

Measured

✓ bbox: [47.85857009887695,17,99.92928314208984] <= [220,220,250]
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.429mm gap
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.429mm gap
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.173mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.175mm gap
✗ nearMiss: 0.175mm gap
✓ minWall: 2.998797394427501 >= 1.2
✗ overhangArea: 119.348360829679 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 54.128138816123986 >= 10
✗ minWall: 0.8712246383712973 not >= 1.2
✗ overhangArea: 57.95170051907662 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 43.478567560931374 >= 10
✗ minWall: 0.03758350978350338 not >= 1.2
✗ overhangArea: 21.863499329385714 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 42.029881837745386 >= 10
✗ minWall: 0.8712246383712973 not >= 1.2
✗ overhangArea: 57.95170051904961 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 43.478567560931374 >= 10
✗ minWall: 0.03758350978350338 not >= 1.2
✗ overhangArea: 21.863499329385714 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 42.02988183774539 >= 10
✗ minWall: 0.8711933188095657 not >= 1.2
✗ overhangArea: 54.577120495294885 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 55.0824054028093 >= 10
✗ minWall: 0.03761010794110307 not >= 1.2
✗ overhangArea: 24.729713047544095 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 61.03646085923817 >= 10
✗ minWall: 0.8711933188095657 not >= 1.2
✗ overhangArea: 54.57712049529488 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 55.0824054028093 >= 10
✗ minWall: 0.03761010794110305 not >= 1.2
✗ overhangArea: 24.729713047544053 not <= 1
✓ bedContactPct: 100 >= 50
✓ footprintPct: 61.03646085923817 >= 10
✓ every named piece is present: ok
✓ a print view places the printed pieces: ok
✓ every printed piece has a footprint above the floor in its print pose: ok
✓ the interface list names only profile fit classes: ok
✓ the part's own verify passes: ok
✓ no unaccepted cost remains: ok
✓ the supports cost is not raised again: mentioned in 0 of turns 0..1 (at most 1)
✓ turn 2 closes with a reply: turn 1 reply has 2059 characters

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed