Photo lid

Kimi K3.1 Pro$0.252m 15s2m 12s waiting on the model2 builds, 1 failed

Reference
iso
front
back
top
bottom
left
right

88of 100

built: 85
geometry: 85
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The top render shows a rounded-rectangle open tray with chamfered inner corners and a rectangular rib grid, matching the photographed lid's silhouette.
- GPT-6 Sol: pass: The render shows the same long, rounded rectangular open tray with a ribbed interior.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The top view's aspect ratio is about 1.6:1, close to the reference's roughly 1.66:1, and the shallow depth looks consistent with a lid.
- GPT-6 Sol: pass: The tray’s length-to-width ratio and the relative size of its interior match the reference by eye.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The renders show the perimeter wall, chamfered inner corners, four corner magnet pockets and the rib grid of 7 lengthwise-spaced by 4 crosswise ribs, all of which appear in the photo.
- GPT-6 Sol: pass: The major visible features—the rib grid, raised perimeter and four corner pockets—are present.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: There are four pockets, one at each corner, the chamfers fall at the four inner corners, and the rib grid divides the floor into 8 columns and 5 rows as in the photo.
- GPT-6 Sol: pass: The grid spans the interior and the round pockets occupy the four corners as in the reference.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra bosses, holes or decorative geometry beyond the reference features are visible in the renders.
- GPT-6 Sol: pass: The renders show no additional tabs, bosses or decorative geometry.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: The top view shows each of the four inner corners cut off diagonally, with a single small round pocket in each corner region.
- GPT-6 Sol: pass: Each of the four diagonally cut-off inner corners has a small round pocket beside it.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The isometric view shows the top open with walls rising well above the low ribs, which stop far below the rim.
- GPT-6 Sol: pass: The tray is uncovered, and its perimeter walls rise clearly above the low floor ribs.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✗ 7 ribs across the length on the 8-pocket pitch: predicate returned false
✓ 4 ribs across the width on the 5-pocket pitch: ok
✗ every pocket is open above its floor: predicate returned false
✓ the ribs stop below the rim: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed