Photo lid

Kimi K3.1 Pro$0.332m 46s2m 44s waiting on the model1 build

Reference
iso
front
back
top
bottom
left
right

92of 100

built: 100
geometry: 85
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The renders show a shallow rounded-rectangle tray with chamfered inner corners and a floor rib grid, matching the reference lid seen from above.
- GPT-6 Sol: pass: The render shows the same elongated, rounded rectangular tray with an internal rib grid.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The top view outline is about 922×570 px (ratio ~1.62), close to the reference's ~1.66 length-to-width ratio.
- GPT-6 Sol: pass: The tray’s length-to-width ratio and the grid spacing appear consistent with the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The rib grid, chamfered inner corners, four corner magnet pockets, rounded outer corners and perimeter walls are all present.
- GPT-6 Sol: pass: The perimeter walls, rib grid, cut-off inner corners, and four circular corner pockets are visible.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The grid has 7 vertical and 4 horizontal ribs forming 8×5 cells as in the photo, and the pockets sit at the four corners.
- GPT-6 Sol: pass: The ribs span the tray in the same pattern, and a pocket sits at each corner.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra bosses, holes or decorative geometry beyond the reference features are visible.
- GPT-6 Sol: pass: The renders show no unexplained geometry beyond the tray, ribs, and corner pockets.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: All four inner corners are cut diagonally, and each carries one small round pocket in the top view.
- GPT-6 Sol: pass: All four inner corners are diagonally cut off, with a small round pocket at each corner.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The isometric view shows an open top, with walls rising well above the low ribs, which stop far below the rim.
- GPT-6 Sol: pass: The tray is open at the top, and its walls rise clearly above the rib grid.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✗ 7 ribs across the length on the 8-pocket pitch: predicate returned false
✗ 4 ribs across the width on the 5-pocket pitch: predicate returned false
✓ every pocket is open above its floor: ok
✓ the ribs stop below the rim: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed