Photo lid

Kimi K3.1 Pro$0.373m 26s3m 24s waiting on the model2 builds

Reference
iso
front
back
top
bottom
left
right

92of 100

built: 100
geometry: 85
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The render shows a shallow rectangular tray with rounded outer corners, chamfered inner cavity corners and a rib grid, matching the reference lid seen from above.
- GPT-6 Sol: pass: The render shows the same open rectangular case lid with rounded outer corners and a ribbed interior.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The top-view aspect ratio is about 1.61, against about 1.63 in the reference, and the rim width relative to the cavity looks comparable.
- GPT-6 Sol: pass: The length-to-width ratio and the relative sizes of the rim, floor, and grid closely match the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The rim, the chamfered inner corners, the four corner magnet pockets and the rib grid are all present.
- GPT-6 Sol: pass: The major visible features—the rib grid, corner cutoffs, and four round corner pockets—are present.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The grid has 7 vertical and 4 horizontal ribs forming 8x5 cells as in the photo, and the pockets sit in the four corners beside the chamfers.
- GPT-6 Sol: pass: The ribs form the same seven-by-four crossing pattern, and the pockets occupy the four corresponding corners.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra geometry beyond the tray, ribs and corner pockets is visible, and the bottom face is plain.
- GPT-6 Sol: pass: The renders show no added tabs, bosses, or decorative geometry absent from the reference.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: Each of the four inner corners is cut diagonally, and a single small round pocket sits in the corner region behind each chamfer.
- GPT-6 Sol: pass: All four inner corners have diagonal cutoffs with a small round pocket at each corner.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The isometric view shows an open tray whose walls rise well above the low ribs, with no cover.
- GPT-6 Sol: pass: The tray is open, and its perimeter walls rise well above the ribs without any ribs reaching the rim.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✗ 7 ribs across the length on the 8-pocket pitch: predicate returned false
✗ 4 ribs across the width on the 5-pocket pitch: predicate returned false
✓ every pocket is open above its floor: ok
✓ the ribs stop below the rim: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed