Photo lid then centred

Sonnet 5.5, effort high$0.221m 32s1m 31s waiting on the model2 builds

Reference
iso
front
back
top
bottom
left
right

96of 100

built: 100
geometry: 93
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The top view shows a rounded-corner rectangular open tray with an internal rib grid and chamfered inner corners, matching the reference silhouette.
- GPT-6 Sol: pass: The render shows the same open rectangular tray with rounded outer corners and a ribbed interior as the reference.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The render's outline is about 922×570 px (ratio ~1.62), which agrees closely with the reference's ~1.66 aspect ratio, and the shallow depth is plausible.
- GPT-6 Sol: pass: The top-view length-to-width ratio, narrow perimeter, and grid spacing closely match the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The 8×5 rib grid, chamfered inner corners, perimeter walls and four corner round pockets are all present.
- GPT-6 Sol: pass: The major visible features—the perimeter lip, interior rib grid, diagonal inner corners, and four corner pockets—are present.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The four round pockets sit at the four corners behind the diagonal cuts, and the grid spans the floor with eight columns and five rows, as in the reference.
- GPT-6 Sol: pass: The ribs and corner pockets occupy the same relative positions as in the reference.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra decorative or unexplained geometry appears; the plain bottom and sides show nothing beyond the tray.
- GPT-6 Sol: pass: The renders show no decorative or unexplained geometry beyond the tray, ribs, and corner pockets.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: Each inner corner has a diagonal chamfer face, with a single small round hole in the corner rim.
- GPT-6 Sol: pass: All four inner corners are cut off diagonally, with one small round pocket at each corresponding outer corner.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The isometric view shows tall walls rising well above low ribs, with an open top and no ribs reaching the rim.
- GPT-6 Sol: pass: The angled render shows an uncovered tray whose walls rise well above the low rib grid.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✗ 7 ribs across the length on the 8-pocket pitch: predicate returned false
✗ 4 ribs across the width on the 5-pocket pitch: predicate returned false
✓ every pocket is open above its floor: ok
✓ the ribs stop below the rim: ok
✓ the straight-on photo joined scoring: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed