Photo lid then centred

Sonnet 5.5, effort high$0.261m 41s1m 39s waiting on the model4 builds, 1 failed

Reference
iso
front
back
top
bottom
left
right

96of 100

built: 85
geometry: 100
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The top view shows a rounded-rectangle open tray with a rib grid and chamfered inner corners, matching the reference silhouette.
- GPT-6 Sol: pass: The render shows the same open rectangular tray silhouette with rounded outer corners as the overhead reference.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The render's outline is about 920x570 (ratio ~1.62), close to the reference's ~1330x810 (~1.64), and the 8x5 cell grid matches.
- GPT-6 Sol: pass: The tray’s length-to-width ratio, rim width, and grid spacing appear consistent with the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: Four corner pockets/holes, diagonal inner-corner chamfers, a rib grid and perimeter walls are all present.
- GPT-6 Sol: pass: The raised rim, interior rib grid, diagonal corner cutoffs, and four small corner pockets are present.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The holes sit in the four outer corners beside the diagonal chamfers, and the ribs divide the floor into 8 columns by 5 rows as in the reference.
- GPT-6 Sol: pass: The ribs span the tray in the same pattern, and the pockets sit at the four corners as in the reference.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra decorative geometry is visible beyond what the reference shows.
- GPT-6 Sol: pass: The renders show no added tabs, bosses, or other unexplained geometry.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: Each inner corner is cut diagonally, and each corner carries a single small round hole.
- GPT-6 Sol: pass: Each interior corner has a diagonal cutoff with one small round pocket nearby.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The isometric view shows walls rising well above the low ribs, the top is open, and the ribs do not reach the rim.
- GPT-6 Sol: pass: The tray is uncovered, and its surrounding walls rise clearly above the rib grid.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✓ 7 ribs across the length on the 8-pocket pitch: ok
✓ 4 ribs across the width on the 5-pocket pitch: ok
✓ every pocket is open above its floor: ok
✓ the ribs stop below the rim: ok
✓ the straight-on photo joined scoring: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed