Mesh rebuild scan

Sonnet 5.5, effort high$0.1945s42s waiting on the model3 builds, 1 failed

Reference
iso
front
back
top
bottom
left
right

96of 100

built: 85
geometry: 100
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The result is a rectangular block with a single vertical round through-hole, matching the scanned block's silhouette in the isometric view.
- GPT-6 Sol: pass: The result has the same rectangular block silhouette with a single hole in its broad face.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The side, front, and top views match the scan's extents nearly pixel-for-pixel (e.g., the top view spans ~51–972 by ~224–798 in both).
- GPT-6 Sol: pass: The block’s length, width, thickness, and hole size appear proportionally close to the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The single through-hole present in the scan is reproduced.
- GPT-6 Sol: pass: The reference’s single round hole is present in the result.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The hole is centered on the top face in both the scan's and the result's top views.
- GPT-6 Sol: pass: The hole sits near the center of the broad face, as it does in the reference.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra geometry beyond the block and hole appears in any result view.
- GPT-6 Sol: pass: The renders show no additional features or unexplained geometry.
Pass:A clean block with flat faces and one round hole — the scan's noise is gone
- Opus 5.5: pass: The result has crisp flat faces, sharp edges, and a smooth circular hole, with none of the scan's wobble or jagged hole edge.
- GPT-6 Sol: pass: The result has flat faces, straight edges, and a smooth round hole without the scan’s visible noise.
Pass:The hole is visible from both the top and bottom views
- Opus 5.5: pass: The background is visible through the hole in both the top and bottom result views.
- GPT-6 Sol: pass: The hole is visible in both the top and bottom views.

Measured

✓ watertight: true == true
✓ one sub-part named block: ok
✓ bounding box within 0.5 mm of the mesh: ok
✓ volume within 5 % of the mesh: ok
✓ symmetric difference under the measured floor: ok
✓ the bore is 10 mm: ok
✓ the bore goes all the way through: ok
✓ the imported scan is still declared as an import: ok
✓ asked the oracle at most once: ok
✓ sweep length=30: length tracks the control: ok
✓ sweep length=50: length tracks the control: ok
✓ sweep boreDiameter=3: bore diameter tracks the control: ok
✓ sweep boreDiameter=12: bore diameter tracks the control: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed