Photo lid then centred

GPT-6.1 Sol, effort high$0.385m 10s5m 5s waiting on the model5 builds, 1 failed

Reference
iso
front
back
top
bottom
left
right

93of 100

built: 85
geometry: 100
AI judge: 6 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The top view shows a rounded-rectangle open tray with a rib grid and chamfered inner corners, matching the reference silhouette.
- GPT-6 Sol: pass: The render shows the same open rectangular tray with rounded outer corners and a gridded interior.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The outline aspect is about 1.61 versus about 1.66 in the reference, and the grid cells and wall widths look comparable.
- GPT-6 Sol: pass: The tray’s length-to-width ratio, rim width, and grid spacing appear close to the overhead reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The rib grid (8 columns by 5 rows), perimeter wall, chamfered inner corners and four corner round pockets are all present.
- GPT-6 Sol: pass: The raised rim, interior rib grid, diagonal inner corners, and four round corner pockets are present.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The pockets sit in each corner pad, and the ribs are evenly spaced as in the reference.
- GPT-6 Sol: pass: The grid and corner pockets occupy the same areas as they do in the reference.
Fail:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: fail: Small triangular notches flank each corner pocket in the render, and the reference does not show them.
- GPT-6 Sol: fail: The render adds small triangular recesses around the corner pockets that are not visible in the reference.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: Each inner corner is cut off diagonally, and each carries a single small round pocket.
- GPT-6 Sol: pass: All four inner corners are cut off diagonally, with one round pocket at each corner.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The isometric view shows an open tray whose walls rise well above the low rib grid, with no cover.
- GPT-6 Sol: pass: The tray is uncovered, and its perimeter walls stand clearly above the low interior rib grid.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✓ 7 ribs across the length on the 8-pocket pitch: ok
✓ 4 ribs across the width on the 5-pocket pitch: ok
✓ every pocket is open above its floor: ok
✓ the ribs stop below the rim: ok
✓ the straight-on photo joined scoring: ok

Loading the transcript…

Run hard-compact-2026-10-162026-10-16commit 6fa9f854spend $116.04 + $54.69 AI judging, 1 unpricedOther runs: 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed