608 bearing seat

Opus 5.5, effort high$0.2156s55s waiting on the model2 builds, 1 failed

96of 100

What the AI judge checked

Pass:A square plate of uniform outer thickness
- Opus 5.5: pass: Top/bottom views show a square outline and side views show a constant-height rectangular profile.
- GPT-6 Sol: pass: The renders show a square plate with straight sides and uniform outer thickness.
Pass:A central bore with a visible wider step at the top, not a plain straight hole
- Opus 5.5: pass: The isometric and top views show a wider counterbore ring with a visible step ledge above the narrower through-bore.
- GPT-6 Sol: pass: A concentric ledge is visible inside the central bore below the wider top opening.
Pass:Four small holes near the corners on a square pattern
- Opus 5.5: pass: Four small through-holes are visible near each corner in a square pattern in the top and bottom views.
- GPT-6 Sol: pass: Four small holes appear near the corners in a square pattern.
Pass:The central bore is open at the bottom face as well as the top
- Opus 5.5: pass: Background is visible through the central bore in both the top and bottom views, and the bottom view shows the bore opening.
- GPT-6 Sol: pass: The bottom view shows the central bore opening through the underside.
Pass:Nothing added beyond the stepped bore and the four holes
- Opus 5.5: pass: No extra features beyond the stepped bore and four corner holes are visible in any render.
- GPT-6 Sol: pass: No features beyond the stepped central bore and four corner holes are visible.

Verdict: acceptable (from the ranking's acceptable line, not typed on this attempt)

Loading the transcript…