Photo lid then centred

Kimi K3.1 Pro$0.595m 41s5m 37s waiting on the model3 builds

Reference
iso
front
back
top
bottom
left
right

95of 100

built: 100
geometry: 91
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The top render shows a rounded-rectangle shallow tray with ribbed floor, matching the reference lid's silhouette from above.
- GPT-6 Sol: pass: The result has the same open rectangular tray form and rounded outer silhouette as the reference.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The render's aspect ratio is about 920x570 (~1.61), close to the reference's ~1330x810 (~1.64), with a similar rim width.
- GPT-6 Sol: pass: The overall length-to-width ratio, rim width, and grid spacing appear close to the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The render shows four corner holes, a rib grid of 8 columns by 5 rows, and diagonal inner corners, matching the reference.
- GPT-6 Sol: pass: The raised grid, perimeter lip, and four corner pockets visible in the reference are present.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The corner holes sit at the four outer corners, and the grid fills the floor in the same arrangement as the reference.
- GPT-6 Sol: pass: The grid lines and corner pockets occupy corresponding positions in the top views.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra decorative geometry is visible beyond the rim, holes, ribs and corner chamfers.
- GPT-6 Sol: pass: The renders show no added tabs, bosses, or other unexplained geometry.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: The top view shows each inner corner cut diagonally with one small round hole at each corner.
- GPT-6 Sol: pass: All four inner corners are cut back diagonally beside small round corner pockets.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The isometric view shows the walls standing well above short floor ribs that stop short of the rim, with no cover.
- GPT-6 Sol: pass: The tray is uncovered, and its perimeter walls rise well above the low floor grid.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✓ 7 ribs across the length on the 8-pocket pitch: ok
✓ 4 ribs across the width on the 5-pocket pitch: ok
✓ every pocket is open above its floor: ok
✓ the ribs stop below the rim: ok
✓ the straight-on photo joined scoring: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed