Lid fit and finger hole

Kimi K3.1 Pro$0.301m 40s1m 37s waiting on the model6 builds, 1 failed

iso
front
back
top
bottom
left
right

96of 100

built: 85
geometry: 100
AI judge: 5 of 5

What the AI judge checked

Pass:The lid sits down inside the box's opening rather than over the outside of it
- Opus 5.5: pass: The yellow lid sits inside the blue box's opening with the blue rim visible around it, slightly below the rim top.
- GPT-6 Sol: pass: The lid sits within the blue rim of the box rather than extending over its outside edges.
Pass:The lid is a plain rectangular block with no lip, rib, step or chamfer on it
- Opus 5.5: pass: The lid appears as a plain flat rectangular slab with straight edges and no visible lip, step, or chamfer.
- GPT-6 Sol: pass: The visible lid is a flat rectangle with straight edges and no visible lip, rib, step, or chamfer.
Pass:The finger hole is a clean round hole straight through the lid, not a slot or a cone-shaped recess
- Opus 5.5: pass: The top view shows a clean circular hole through which the blue box floor is visible, with straight cylindrical walls in the iso view.
- GPT-6 Sol: pass: A clean circular opening is centered in the lid, with the box visible through it.
Pass:The box's walls look the same thickness all the way round its opening
- Opus 5.5: pass: The top view shows the blue rim with uniform width on all four sides of the opening.
- GPT-6 Sol: pass: The blue rim appears uniform in thickness around all four sides of the opening.
Pass:No other features on either piece
- Opus 5.5: pass: No extra features are visible on either the box or lid beyond the single finger hole.
- GPT-6 Sol: pass: No features other than the centered finger hole are visible on the lid or box.

Measured

✓ bbox: [60,40,30] <= [60.5,40.5,30.5]
✓ overlaps: 0 == 0
✓ clearance: 0.6000003814697266 in 0.45..0.85
✓ exactly two sub-parts named body and lid: ok
✓ both sub-parts are solid: ok
✓ body still 60 × 40 × 30 and hollow: ok
✓ lid is the 0.6 mm slip-fit plug: 54.8 × 34.8 × 5: ok
✓ lid has one through-hole: ok
✓ finger hole is 8 mm: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed