Bracket second mount

Kimi K3.1 Pro$0.282m 1s1m 55s waiting on the model3 builds

100of 100

What the AI judge checked

Pass:An L-shaped bracket: a flat base plate with a wall standing up along one edge
- Opus 5.5: pass: The side views show a clear L profile, with a flat base plate and a wall rising along one edge.
- GPT-6 Sol: pass: The renders show a flat base plate with a vertical wall along one edge.
Pass:Two small round holes through the flat base plate
- Opus 5.5: pass: The isometric and bottom views show two small round holes passing through the base plate.
- GPT-6 Sol: pass: Two small round through-holes are visible in the base plate.
Pass:Two small round holes through the upright wall, near its top
- Opus 5.5: pass: The front view shows two small round holes near the top corners of the upright wall.
- GPT-6 Sol: pass: Two small round through-holes are visible near the top of the upright wall.
Pass:One much larger round hole through the middle of the upright wall
- Opus 5.5: pass: A much larger round through-hole sits centred in the upright wall, as seen in the front view.
- GPT-6 Sol: pass: One much larger round through-hole is visible in the middle of the upright wall.
Pass:The large hole does not run into or overlap any of the small holes
- Opus 5.5: pass: The front view shows solid material separating the large hole from both small upper holes, and it sits well above the base.
- GPT-6 Sol: pass: The large hole is visibly separated from both upright holes and the two base holes.

Loading the transcript…