Rpi4 tray

Kimi K3.1 Pro$0.1246s44s waiting on the model2 builds, 1 failed

96of 100

What the AI judge checked

Pass:A flat rectangular plate, longer along one axis than the other
- Opus 5.5: pass: The top and bottom views show a flat rectangular plate wider along X than along Y.
- GPT-6 Sol: pass: The renders show a flat rectangular plate that is longer in one direction.
Pass:Four short round standoffs standing up from the plate near its corners
- Opus 5.5: pass: Four short cylindrical standoffs rise from the top face near each corner, as seen in the isometric and side views.
- GPT-6 Sol: pass: Four short round standoffs rise from the plate near its corners.
Pass:Each standoff has a hole down its centre
- Opus 5.5: pass: Each standoff shows a central bore, and the bottom view shows four through-holes in the plate at the standoff locations.
- GPT-6 Sol: pass: A centred hole is visible in the top of each standoff.
Pass:A rectangular notch cut into the middle of one short edge
- Opus 5.5: pass: A rectangular notch is cut into the middle of the right-hand (+X) short edge, visible in the top, bottom and end views.
- GPT-6 Sol: pass: A rectangular notch is cut into the middle of a short edge.
Pass:Nothing else on the plate
- Opus 5.5: pass: No features beyond the plate, the four standoffs, their holes and the notch are visible in any render.
- GPT-6 Sol: pass: The plate shows only the four standoffs, their holes, and the edge notch.

Loading the transcript…