Mesh socket mount

Kimi K3.1 Pro$0.161m 17s1m 15s waiting on the model2 builds

Reference
iso
front
back
top
bottom
left
right

100of 100

built: 100
geometry: 100
AI judge: 8 of 8

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The result is a flat rectangular panel with an L-shaped through-socket matching the bracket's side silhouette (vertical leg at one end, long horizontal base).
- GPT-6 Sol: pass: The produced part is a flat rectangular panel with an L-shaped socket instead of a bracket.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The L opening's leg height versus base length and thin wall widths match the reference side view proportions, with the panel extending a modest margin around it.
- GPT-6 Sol: pass: The panel has a thin edge and a broad face, with a socket sized and positioned plausibly relative to the bracket silhouette.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The only feature expected, the L-shaped socket, is present and cuts fully through the panel.
- GPT-6 Sol: pass: The requested panel and L-shaped socket are visible; the bracket’s holes and slots are not expected in the panel.
Pass:Those features sit where the reference has them, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The socket sits centred in the panel with the upright leg at one end and the base along the bottom, matching the bracket's orientation in the reference side view.
- GPT-6 Sol: pass: The L-shaped socket sits inside the rectangular panel with material visible on every side.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: No extra holes, bosses or decorative geometry appear on the panel besides the socket.
- GPT-6 Sol: pass: The renders show no additional holes, bosses, or decorative features on the panel.
Pass:The opening is L-shaped, following the bracket's own profile, rather than round, rectangular or a rough approximation of it
- Opus 5.5: pass: The front and back views show a clear L-shaped opening with thin leg and base, not a rectangle or bounding box.
- GPT-6 Sol: pass: The face-on renders show a continuous L-shaped opening rather than a rectangular or round cutout.
Pass:There is exactly one opening through the panel — no extra holes, slots or pockets
- Opus 5.5: pass: Only one L-shaped opening is visible through the panel.
- GPT-6 Sol: pass: Only one connected L-shaped opening is visible.
Pass:The material around the opening is unbroken — no part of the opening runs out to an outer edge of the panel
- Opus 5.5: pass: A continuous border of panel material surrounds the L opening on all sides.
- GPT-6 Sol: pass: The opening does not reach any outer edge, leaving a continuous border around it.

Measured

✓ watertight: true == true
✓ one sub-part named mount: ok
✓ the imported bracket is still declared as an import: ok
✓ the panel is 95 by 65 mm, 6 mm thick, and stands where the prompt puts it: ok
✓ the socket clears the bracket grown 3 %: ok
✓ the panel is still solid in the L's open corner: ok
✓ the socket is open through the panel where the upright passes: ok
✓ asked the oracle at most once: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed