Mesh socket mount

Sonnet 5.5, effort high$0.0835s34s waiting on the model2 builds

Reference
iso
front
back
top
bottom
left
right

100of 100

built: 100
geometry: 100
AI judge: 8 of 8

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The result is a flat rectangular panel with an L-shaped through-opening matching the bracket's side silhouette.
- GPT-6 Sol: pass: The renders show a flat rectangular panel with a through-opening shaped like the reference bracket’s L-shaped profile.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The L opening's long horizontal leg and shorter vertical leg match the bracket's base length and upright height ratio seen in the reference side view.
- GPT-6 Sol: pass: The panel has a narrow thickness and a visible border around an opening whose horizontal and vertical legs have proportions consistent with the bracket’s profile.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The required L-shaped socket is present; bracket holes and slots are not expected in the panel.
- GPT-6 Sol: pass: The required L-shaped socket is present, while the bracket’s holes and slots are appropriately absent from the panel.
Pass:Those features sit where the reference has them, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The socket sits centred within the panel with a margin on all sides, oriented like the bracket's profile.
- GPT-6 Sol: pass: The socket’s vertical leg is at the left and its horizontal leg runs along the bottom, matching the bracket’s profile.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: No extra geometry beyond the panel and the L-shaped socket is visible.
- GPT-6 Sol: pass: The renders show only the rectangular panel and its L-shaped opening, with no decorative or unexplained geometry.
Pass:The opening is L-shaped, following the bracket's own profile, rather than round, rectangular or a rough approximation of it
- Opus 5.5: pass: The front and back views show a clean L-shaped opening with thin legs following the bracket profile.
- GPT-6 Sol: pass: Front and back views clearly show a narrow L-shaped opening rather than a round or rectangular cutout.
Pass:There is exactly one opening through the panel — no extra holes, slots or pockets
- Opus 5.5: pass: Only the single L-shaped opening appears through the panel.
- GPT-6 Sol: pass: The panel shows exactly one connected through-opening and no additional holes, slots, or pockets.
Pass:The material around the opening is unbroken — no part of the opening runs out to an outer edge of the panel
- Opus 5.5: pass: A continuous border of material surrounds the L opening on all sides in the face-on views.
- GPT-6 Sol: pass: Panel material visibly surrounds the entire L-shaped opening without the cut reaching an outer edge.

Measured

✓ watertight: true == true
✓ one sub-part named mount: ok
✓ the imported bracket is still declared as an import: ok
✓ the panel is 95 by 65 mm, 6 mm thick, and stands where the prompt puts it: ok
✓ the socket clears the bracket grown 3 %: ok
✓ the panel is still solid in the L's open corner: ok
✓ the socket is open through the panel where the upright passes: ok
✓ asked the oracle at most once: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed