Mesh add tabs

Kimi K3.1 Pro$0.191m 42s1m 39s waiting on the model2 builds

Reference
iso
front
back
top
bottom
left
right

98of 100

built: 100
geometry: 100
AI judge: 7 of 8

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The result is the same rounded-rectangle lid with an inner rim, now with one rectangular tab with a hole projecting from each short end.
- GPT-6 Sol: pass: The result retains the reference’s shallow, rounded rectangular lid and adds a holed tab at each short end.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The lid's aspect ratio, rim, and plate step look the same as in the reference, and the added tabs are modest in size.
- GPT-6 Sol: pass: The lid’s length, width, rim height, and corner rounding appear consistent with the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The stepped base plate, raised rim wall, and recessed interior from the reference are all still present in the result renders.
- GPT-6 Sol: pass: The recessed interior, raised perimeter lip, and outer plate edge remain visible, alongside the requested tabs and holes.
Pass:Those features sit where the reference has them, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The rim and plate step sit in the same positions as in the reference, and the tabs are centred on the short ends.
- GPT-6 Sol: pass: The lip and recess occupy the same positions as in the reference, and the tabs are centered on opposite short ends.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: Apart from the two holed tabs, no extra geometry appears in any view.
- GPT-6 Sol: pass: No geometry beyond the reference lid and the requested mounting tabs and holes is visible.
Fail:The tabs read as flat flanges continuing the lid's outer face, not posts, brackets or blocks bolted onto itAI judges disagreed
- Opus 5.5: fail: In the front and back views the tabs are visibly thinner than the base plate and align with its top surface, so they are not flush with the bottom face the lid stands on.
- GPT-6 Sol: pass: Both tabs appear as thin, flat extensions of the lid’s base plate rather than upright posts or brackets.
Pass:Each tab carries exactly one round hole and no other openings
- Opus 5.5: pass: The top and bottom views show exactly one round through-hole in each tab and no other openings.
- GPT-6 Sol: pass: The top view shows exactly one round opening in each tab.
Pass:Each tab is joined to the lid along its end rather than floating beside it or touching at a corner
- Opus 5.5: pass: Each tab joins the middle of its short end along a straight edge, as seen in the top and iso views.
- GPT-6 Sol: pass: Each tab meets the lid along a portion of its short-end edge.

Measured

✓ watertight: true == true
✓ one sub-part named lid: ok
✓ the imported lid is still declared as an import: ok
✓ the lid's own volume survives: ok
✓ nothing solid was added inside the lid's own footprint: ok
✓ the part spans 12 mm past the lid at both ends together: ok
✓ the tabs are on the short ends, not the long ones: ok
✓ the -X tab hole clears 3.4 mm at the 102 mm pitch: ok
✓ the +X tab hole clears 3.4 mm at the 102 mm pitch: ok
✓ the -X tab fills the lid's own thickness beyond its hole: ok
✓ the +X tab fills the lid's own thickness beyond its hole: ok
✓ asked the oracle at most once: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed