Mesh add tabs

Sonnet 5.5, effort high$0.1243s41s waiting on the model4 builds, 1 failed

Reference
iso
front
back
top
bottom
left
right

96of 100

built: 85
geometry: 100
AI judge: 8 of 8

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The result shows the same rounded-rectangle lid with its stepped plate and raised rim, plus one flat rectangular tab on each short end.
- GPT-6 Sol: pass: The result retains the reference lid’s recessed rectangular form and adds a holed tab at each short end.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The lid's aspect in the top view is about 1.5:1, matching the reference's 920x614 px, and the plate and rim heights look the same in the side views.
- GPT-6 Sol: pass: The lid’s length, width, rim height, and corner rounding appear consistent with the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The plate step, raised rim wall, inner recess and rounded corners from the reference are all still visible in the result renders.
- GPT-6 Sol: pass: The recessed center, raised rim, and lower perimeter flange remain visible, alongside the requested tabs and holes.
Pass:Those features sit where the reference has them, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The rim stays inset on the plate as in the reference, and the tabs are centred on the short ends.
- GPT-6 Sol: pass: The original lid features retain their reference positions, and the tabs extend from opposite short ends.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry, allowing for the requested change: the lid itself unchanged, with two flat mounting tabs added past its short ends, each carrying one through-hole
- Opus 5.5: pass: The only geometry added is the two holed tabs; no other features appear.
- GPT-6 Sol: pass: No geometry beyond the reference lid and the requested mounting tabs and holes is visible.
Pass:The tabs read as flat flanges continuing the lid's outer face, not posts, brackets or blocks bolted onto it
- Opus 5.5: pass: The side views show thin tabs at plate thickness that continue the plate level, reading as flat flanges rather than blocks.
- GPT-6 Sol: pass: Both tabs are thin, flat extensions at the level of the lid’s base rather than upright posts or brackets.
Pass:Each tab carries exactly one round hole and no other openings
- Opus 5.5: pass: The top and bottom views show exactly one small round hole in each tab and no other openings.
- GPT-6 Sol: pass: The top and bottom views show exactly one round opening in each tab.
Pass:Each tab is joined to the lid along its end rather than floating beside it or touching at a corner
- Opus 5.5: pass: In the top view each tab joins the lid along the straight middle of its short end edge.
- GPT-6 Sol: pass: Each tab shares a straight edge with the middle of a short end of the lid.

Measured

✓ watertight: true == true
✓ one sub-part named lid: ok
✓ the imported lid is still declared as an import: ok
✓ the lid's own volume survives: ok
✓ nothing solid was added inside the lid's own footprint: ok
✓ the part spans 12 mm past the lid at both ends together: ok
✓ the tabs are on the short ends, not the long ones: ok
✓ the -X tab hole clears 3.4 mm at the 102 mm pitch: ok
✓ the +X tab hole clears 3.4 mm at the 102 mm pitch: ok
✓ the -X tab fills the lid's own thickness beyond its hole: ok
✓ the +X tab fills the lid's own thickness beyond its hole: ok
✓ asked the oracle at most once: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed