Laser box printed hinges

Kimi K3.1 Pro$0.514m 22s4m 20s waiting on the model2 builds

iso
front
back
top
bottom
left
right

100of 100

built: 100
geometry: 100
AI judge: 6 of 6

What the AI judge checked

Pass:An open box built from flat panels — a bottom and four walls — with a separate flat lid
- Opus 5.5: pass: The renders show a bottom panel, four walls, and a separate flat lid panel shown open.
- GPT-6 Sol: pass: The open box visibly has a bottom and four flat walls, with a separate flat lid above it.
Pass:The corners are finger-jointed: the fingers of adjoining panels interlock rather than overlapping or leaving gaps
- Opus 5.5: pass: Corner edges show alternating finger outlines flush with the adjoining panels, with no visible overlaps or gaps.
- GPT-6 Sol: pass: Alternating fingers meet along the panel corners without visible overlaps or gaps.
Pass:Two hinges sit along the back edge, joining the lid to the back panel
- Opus 5.5: pass: Blue and green hinges sit along the back top edge between the back panel and the lid.
- GPT-6 Sol: pass: Two colored hinges sit along the back edge between the lid and back panel.
Pass:The word TOOLS is engraved on the front panel and is legible
- Opus 5.5: pass: The front view clearly shows TOOLS engraved in outline lettering on the front panel.
- GPT-6 Sol: pass: TOOLS is clearly legible on the front panel.
Pass:The lid is attached through the hinges rather than floating free of the box
- Opus 5.5: pass: The hinge leaves overlap both the lid and the back panel, with their tabs visible through slots in each, so the lid is connected through the hinges.
- GPT-6 Sol: pass: The lid is joined to the back panel by the two visible hinges.
Pass:No floating, detached or unexplained geometry
- Opus 5.5: pass: Every visible element is a box panel, the lid, or a hinge, and no stray geometry appears.
- GPT-6 Sol: pass: No floating, detached, or unexplained geometry is visible.

Measured

✓ at least five sheet panels: ok
✓ sheet thickness bound to a control: ok
✓ a clearance control and no kerf control: ok
✓ the clearance control is one the kit's README lists: ok
✓ at least two printed parts: ok
✓ verify.ok from declared expectations: ok
✓ the cut & print kit builds: ok
✓ the kit carries print files for the hinges: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed