Browse forges Learn Blog

Bottle neck adapter

Kimi K3.1 Pro$0.171m 17s1m 16s waiting on the model3 builds, 1 failed

Kimi K3.1 Pro's Bottle neck adapter, iso view

iso
front
back
top
bottom
left
right

96of 100

built: 85
geometry: 100
AI judge: 4 of 4

What the AI judge checked

Pass:A straight round tube, open at both ends
- Opus 5.5: pass: Side views show a straight cylinder with parallel sides, and the top and bottom views both show an open bore with background visible through it.
- GPT-6 Sol: pass: The renders show a straight cylindrical tube with an open top and a visible opening at the far end of the bore.
Pass:The wall looks the same thickness all the way round
- Opus 5.5: pass: The top and bottom views show a concentric light rim of constant width all the way round.
- GPT-6 Sol: pass: The end view shows concentric circular edges and a wall of even apparent thickness all around.
Pass:No flanges, threads or other features were added
- Opus 5.5: pass: The side views show a plain, smooth cylindrical surface with no flanges, threads or other added features.
- GPT-6 Sol: pass: The exterior is smooth, with no visible flanges, threads, or other added features.
Pass:You can see straight through the tube
- Opus 5.5: pass: The top and bottom views show the light background through the central bore.
- GPT-6 Sol: pass: The background is visible through the center of the tube in the end view.

Measured

✓ watertight: true == true
✓ holes: 1 == 1
✓ one sub-part named tube: ok
✓ outer is exposed as 20 to 40: ok
✓ inner is exposed as 12 to 36: ok
✓ default tube is 28 across and 30 long: ok
✓ bore tracks inner, capped so the wall stays 1.2 mm: ok
✓ sweep outer=20: watertight: true == true
✓ sweep outer=20: holes: 1 == 1
✓ sweep outer=20: swept build is not empty: ok
✓ sweep outer=20: the bore moves with the controls: ok
✓ sweep outer=20: bore tracks inner, capped so the wall stays 1.2 mm: ok
✓ sweep outer=20: outer tracks the control: ok
✓ sweep outer=40: watertight: true == true
✓ sweep outer=40: holes: 1 == 1
✓ sweep outer=40: swept build is not empty: ok
✓ sweep outer=40: the bore moves with the controls: ok
✓ sweep outer=40: bore tracks inner, capped so the wall stays 1.2 mm: ok
✓ sweep outer=40: outer tracks the control: ok
✓ sweep inner=12: watertight: true == true
✓ sweep inner=12: holes: 1 == 1
✓ sweep inner=12: swept build is not empty: ok
✓ sweep inner=12: the bore moves with the controls: ok
✓ sweep inner=12: bore tracks inner, capped so the wall stays 1.2 mm: ok
✓ sweep inner=36: watertight: true == true
✓ sweep inner=36: holes: 1 == 1
✓ sweep inner=36: swept build is not empty: ok
✓ sweep inner=36: the bore moves with the controls: ok
✓ sweep inner=36: bore tracks inner, capped so the wall stays 1.2 mm: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-sonnet-hard2026-11-05commit 58201d93spend $50.99 + $14.79 AI judgingOther runs: 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed