Browse forges Learn Blog

Mesh rebuild freecad bracket

Kimi K3.1 Pro$0.311m 59s1m 52s waiting on the model3 builds, 1 failed

Kimi K3.1 Pro's Mesh rebuild freecad bracket, iso view

Reference
iso
front
back
top
bottom
left
right

26of 100

built: 85
geometry: 0
AI judge: n/a

A gate failed, so geometry scores zero for this attempt.

Measured

✓ watertight: true == true
✓ one sub-part named bracket: ok
✓ volume within 3 % of the mesh: ok
✓ bounding box within 0.5 mm of the mesh: ok
✓ symmetric difference under the measured floor: ok
✓ holes match the mesh: ok
✓ the imported bracket is still declared as an import: ok
✓ asked the oracle at most once: ok
✓ sweep thickness=2: base thickness tracks the control: ok
✓ sweep thickness=2: the upright still reaches the mesh's height: ok
✓ sweep thickness=8: base thickness tracks the control: ok
✓ sweep thickness=8: the upright still reaches the mesh's height: ok
✓ sweep holeDiameter=3: hole diameter tracks the control: ok
✓ sweep holeDiameter=8: hole diameter tracks the control: ok
✗ sweep width=65: width tracks the control: predicate returned false
✗ sweep width=85: width tracks the control: predicate returned false

Loading the transcript…

This is an older run. See the current results.

Run kimi31-vs-sonnet2026-11-05commit 0f156dfaspend $12.07 + $2.76 AI judgingOther runs: 2026-11-05T06-56-21-kimi31-sonnet-hard, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed