Mesh rebuild blender handle

Sonnet 5.5, effort high$0.291m 20s1m 18s waiting on the model3 builds

Reference
iso
front
back
top
bottom
left
right

100of 100

built: 100
geometry: 100
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The result shows the same arched handle with two rectangular feet, matching the reference silhouette in iso and front views.
- GPT-6 Sol: pass: The produced part has the same arched pull-handle silhouette and two-foot form as the reference.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: Arch height to span ratio, foot size, and tube diameter appear the same as the reference in the front and iso views.
- GPT-6 Sol: pass: The arch height, span, grip thickness, and foot sizes appear to match the reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: Both feet with through-holes and the round swept grip are present.
- GPT-6 Sol: pass: Both flat feet and their mounting holes are visible in the produced part.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The holes sit outboard of the tube on each foot, as in the reference top view.
- GPT-6 Sol: pass: The holes sit outward of the grip ends on the feet, as they do in the reference.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: No extra geometry beyond the tube, feet, and holes is visible.
- GPT-6 Sol: pass: The renders show no added geometry beyond the arch and its two mounting feet.
Pass:A D-shaped loop standing off two flat feet, as in the reference
- Opus 5.5: pass: A D/arch-shaped loop rises from two flat rectangular feet.
- GPT-6 Sol: pass: A continuous D-shaped arch rises from two flat feet.
Pass:The grip has a round cross-section
- Opus 5.5: pass: The side view shows a rounded tube end and the shading indicates a circular cross-section.
- GPT-6 Sol: pass: The grip appears smoothly rounded throughout the arch.

Measured

✓ watertight: true == true
✓ one sub-part named handle: ok
✓ volume within 5 % of the mesh: ok
✓ bounding box within 0.5 mm of the mesh: ok
✓ symmetric difference under the measured floor: ok
✓ mounting holes are 114 mm apart: ok
✓ the imported handle is still declared as an import: ok
✓ asked the oracle at most once: ok
✓ sweep span=60: span tracks the control: ok
✓ sweep span=140: span tracks the control: ok
✓ sweep sectionDiameter=4: section tracks the control: ok
✓ sweep sectionDiameter=12: section tracks the control: ok

Loading the transcript…

This is an older run. See the current results.

Run kimi31-vs-sonnet2026-11-05commit 0f156dfaspend $12.07 + $2.76 AI judgingOther runs: 2026-11-05T06-56-21-kimi31-sonnet-hard, 2026-10-16T18-49-10-hard-compact-2026-10-16, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed