Photo lid then centred

Opus 5.5, effort high$1.034m 21s4m 15s waiting on the model4 builds

Reference
iso
front
back
top
bottom
left
right

92of 100

built: 100
geometry: 84
AI judge: 7 of 7

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle
- Opus 5.5: pass: The top render shows a rounded-corner rectangular open tray with a rib grid and chamfered inner corners, matching the reference silhouette.
- GPT-6 Sol: pass: The render shows the same open rectangular tray with rounded outer corners and an interior rib grid.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge
- Opus 5.5: pass: The render outline is about 920x565 (~1.63:1), close to the reference's ~1.66:1, with a similar wall-to-floor ratio.
- GPT-6 Sol: pass: The tray’s length-to-width ratio and the spacing of its grid appear close to the overhead reference.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result
- Opus 5.5: pass: The render has the rib grid (7 vertical, 4 horizontal ribs), diagonal inner-corner chamfers, and a round pocket at each corner, all present in the reference.
- GPT-6 Sol: pass: The major visible features—the perimeter walls, grid, diagonal inner corners, and four corner pockets—are present.
Pass:Those features sit where the reference has them
- Opus 5.5: pass: The corner pockets sit in the four corners behind the diagonal chamfers, and the ribs are evenly spaced across the floor, as in the reference.
- GPT-6 Sol: pass: The grid spans the tray interior, and one round pocket sits at each corner as in the reference.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry
- Opus 5.5: pass: Apart from tiny triangular slivers near the corner pockets, which read as part of the corner chamfer geometry, no extra decorative features are present.
- GPT-6 Sol: pass: The renders show no added tabs, bosses, or other unexplained geometry.
Pass:Each inner corner is cut off diagonally and carries one small round pocket
- Opus 5.5: pass: Each of the four inner corners has a diagonal chamfer face with a single small circular pocket in the corner.
- GPT-6 Sol: pass: All four inner corners are cut off diagonally, with a small round pocket at each corner.
Pass:An open tray whose walls stand well above the rib grid, with no lid, cover or ribs reaching the rim
- Opus 5.5: pass: The iso view shows an open top with tall walls and low ribs that stop well below the rim, with no cover.
- GPT-6 Sol: pass: The angled render shows an uncovered tray whose perimeter walls rise well above the low rib grid.

Measured

✓ watertight: ok
✓ one sub-part named lid: ok
✓ the apply was scored against the photo: ok
✓ silhouette matches the photo: ok
✓ length is 174.34 mm: ok
✓ width is 107 mm ± 10 %: ok
✓ height is 17.98 mm: ok
✓ the tray is hollow: ok
✓ the floor is solid: ok
✗ 7 ribs across the length on the 8-pocket pitch: predicate returned false
✗ 4 ribs across the width on the 5-pocket pitch: predicate returned false
✓ every pocket is open above its floor: ok
✓ the ribs stop below the rim: ok
✓ the straight-on photo joined scoring: ok

Loading the transcript…

Run hard-compact-2026-10-162026-10-16commit 6fa9f854spend $116.04 + $54.69 AI judging, 1 unpricedOther runs: 2026-11-05T06-56-21-kimi31-sonnet-hard, 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed