Rpi4 tray

GPT-6 Sol, effort high$0.0736s34s waiting on the model1 build

100of 100

What the AI judge checked

Pass:A flat rectangular plate, longer along one axis than the other
- Opus 5.5: pass: Renders show a flat rectangular plate wider along X than Y, with low thickness in side views.
- GPT-6 Sol: pass: The renders show a flat rectangular plate that is longer along one axis.
Pass:Four short round standoffs standing up from the plate near its corners
- Opus 5.5: pass: Four short cylindrical standoffs rise from the top face, one near each corner.
- GPT-6 Sol: pass: Four short cylindrical standoffs rise from the plate near its corners.
Pass:Each standoff has a hole down its centre
- Opus 5.5: pass: Each standoff shows a central bore in the top view, and matching holes appear through the plate in the bottom view.
- GPT-6 Sol: pass: A centred hole is visible in the top of each standoff, with corresponding openings on the underside of the plate.
Pass:A rectangular notch cut into the middle of one short edge
- Opus 5.5: pass: A rectangular notch is cut into the middle of the right (short, +X) edge, visible in the top and bottom views.
- GPT-6 Sol: pass: A rectangular notch is cut into the middle of one short edge.
Pass:Nothing else on the plate
- Opus 5.5: pass: Only the plate, the four standoffs, their holes and the notch are present.
- GPT-6 Sol: pass: The plate shows only the four standoffs, their holes, and the requested notch.

Verdict: acceptable (from the ranking's acceptable line, not typed on this attempt)

Loading the transcript…