Mesh socket mount

GPT-6 Sol, effort high$0.181m 5s1m 4s waiting on the model3 builds, 1 failed

Reference
iso
front
back
top
bottom
left
right

96of 100

built: 85
geometry: 100
AI judge: 8 of 8

What the AI judge checked

Pass:The overall form matches the reference: the same kind of object, the same silhouette from the matching angle, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The result is a flat rectangular panel with an L-shaped socket matching the bracket's side-view outline.
- GPT-6 Sol: pass: The renders show a flat rectangular panel with an L-shaped opening matching the bracket’s profile.
Pass:Proportions match: the relative sizes of the major dimensions agree with the reference within what the eye can judge, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The L socket's long leg to short leg ratio and thin wall widths match the bracket's side silhouette, with a modest margin to the panel edges.
- GPT-6 Sol: pass: The opening has a long, narrow horizontal leg and a shorter vertical leg, with a substantial border around it.
Pass:Every major feature visible in the reference (holes, slots, bosses, tabs, lips) is present in the result, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The L-shaped socket is present through the panel; holes and slots are not expected.
- GPT-6 Sol: pass: The bracket’s L-shaped profile is represented by the socket; its holes and slots are appropriately absent from the panel.
Pass:Those features sit where the reference has them, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: The socket sits centred in the panel with the vertical leg at one end and the horizontal leg along the bottom, matching the bracket's orientation.
- GPT-6 Sol: pass: The vertical leg meets one end of the horizontal leg, as it does in the bracket profile.
Pass:Nothing is present that the reference does not show — no decorative or unexplained geometry, allowing for the requested change: the result is not the bracket but a flat rectangular panel with a socket cut through it in the bracket's own L-shaped outline, slightly enlarged; the bracket's holes, slots and thickness are not expected to appear in the panel
- Opus 5.5: pass: No extra geometry beyond the panel and the L-shaped socket is visible.
- GPT-6 Sol: pass: The panel has no visible decorative features or unexplained geometry.
Pass:The opening is L-shaped, following the bracket's own profile, rather than round, rectangular or a rough approximation of it
- Opus 5.5: pass: The front and back views show a clean L-shaped through opening following the bracket profile.
- GPT-6 Sol: pass: The opening is clearly L-shaped rather than rectangular or round.
Pass:There is exactly one opening through the panel — no extra holes, slots or pockets
- Opus 5.5: pass: Only the single L-shaped opening appears in the panel views.
- GPT-6 Sol: pass: The panel shows one continuous opening and no additional holes or slots.
Pass:The material around the opening is unbroken — no part of the opening runs out to an outer edge of the panel
- Opus 5.5: pass: Solid material borders the L opening on all sides, with no opening running out to an outer edge.
- GPT-6 Sol: pass: Panel material surrounds the opening on every side, with no cut reaching an outer edge.

Measured

✓ watertight: true == true
✓ one sub-part named mount: ok
✓ the imported bracket is still declared as an import: ok
✓ the panel is 95 by 65 mm, 6 mm thick, and stands where the prompt puts it: ok
✓ the socket clears the bracket grown 3 %: ok
✓ the panel is still solid in the L's open corner: ok
✓ the socket is open through the panel where the upright passes: ok
✓ asked the oracle at most once: ok

Loading the transcript…

Run hard-compact-2026-10-162026-10-16commit 6fa9f854spend $116.04 + $54.69 AI judging, 1 unpricedOther runs: 2026-11-05T06-56-21-kimi31-sonnet-hard, 2026-11-05T05-50-12-kimi31-vs-sonnet, 2026-09-23T06-56-16-hard-baseline-2026-09-23, 2026-09-10T19-44-23-baseline-2026-09, 2026-09-04T20-02-10-stage2-hard-cases, 2026-09-04T19-48-31-screen-14-fixed