Drawer divider

GPT-6 Sol, effort high$0.0626s26s waiting on the model1 build

100of 100

What the AI judge checked

Pass:A long thin flat plate
- Opus 5.5: pass: The renders show a long, thin rectangular plate whose top view is a narrow strip.
- GPT-6 Sol: pass: The renders show a long, thin plate with a uniform flat face.
Pass:Several narrow slots cut down from the top edge, all the same depth
- Opus 5.5: pass: Four narrow slots run down from the top edge, and all reach the same depth at about half the height.
- GPT-6 Sol: pass: Four narrow slots extend down from the top edge to the same apparent depth.
Pass:The slots are evenly spaced with equal solid ends
- Opus 5.5: pass: In the front view the slots sit at roughly x=235, 419, 603 and 787 on a plate spanning 51 to 973, giving five equal steps of about 184 px.
- GPT-6 Sol: pass: The slot centres appear evenly spaced, with equal distances to the plate’s ends.
Pass:Nothing else was added to the plate
- Opus 5.5: pass: No extra features appear beyond the plate and its slots.
- GPT-6 Sol: pass: No features beyond the plate and its four slots are visible.

Verdict: acceptable (from the ranking's acceptable line, not typed on this attempt)

✓ watertight: true == true
✓ holes: 0 == 0
✓ one sub-part named divider: ok
✓ length is exposed as 100 to 400: ok
✓ slots is exposed as 2 to 8: ok
✓ default plate is 200 x 2 x 40: ok
✓ every slot is open and evenly spaced, the ends are solid: ok
✓ each slot is 2.2 mm wide, with plate either side of it: ok
✓ each slot is 20 mm deep, with plate below it: ok
✓ sweep length=100: watertight: true == true
✓ sweep length=100: holes: 0 == 0
✓ sweep length=100: swept build is not empty: ok
✓ sweep length=100: every slot is open and evenly spaced, the ends are solid: ok
✓ sweep length=100: length tracks the control: ok
✓ sweep length=400: watertight: true == true
✓ sweep length=400: holes: 0 == 0
✓ sweep length=400: swept build is not empty: ok
✓ sweep length=400: every slot is open and evenly spaced, the ends are solid: ok
✓ sweep length=400: length tracks the control: ok
✓ sweep slots=2: watertight: true == true
✓ sweep slots=2: holes: 0 == 0
✓ sweep slots=2: swept build is not empty: ok
✓ sweep slots=2: every slot is open and evenly spaced, the ends are solid: ok
✓ sweep slots=5: watertight: true == true
✓ sweep slots=5: holes: 0 == 0
✓ sweep slots=5: swept build is not empty: ok
✓ sweep slots=5: every slot is open and evenly spaced, the ends are solid: ok
✓ sweep slots=8: watertight: true == true
✓ sweep slots=8: holes: 0 == 0
✓ sweep slots=8: swept build is not empty: ok
✓ sweep slots=8: every slot is open and evenly spaced, the ends are solid: ok

Loading the transcript…